Pairing Two Sound Platform Systems DSS Operation
Dual System Streaming Setup Guide
* Before pairing DSS, please reset the Bluetooth settings on both
Sound Platform 2 systems.
1. Press the button and hold down for 4 seconds
until on the display the icons flash.
2. During the DSS pairing process the icons will continue to
flash for up to one minute. Once the two Sound Platform 2
systems are paired together, the icons will stop flashing.
3. Either Sound Platform 2 system can now be paired and
connected to your phone, tablet, computer or other Bluetooth
device to stream audio. Press the PAIR button on either of the
Sound Platform systems to place it in pair mode. Once in pair
mode the pair indicator will flash rapidly. Note: The pair
indicator turns solid after the device is successfully connected.
Note: The Sound Platform 2 that you connect your Bluetooth
source device to will be designated as the left audio channel.
4. Open the Bluetooth settings menu on your Bluetooth enabled
mobile device or computer. Once the unit is recognized, “Sound
Platform 2” will appear on the list of detected devices. Select
“Sound Platform 2” to pair with your device. On Apple iOS
devices, select Settings > General > Bluetooth and tap “Sound
Platform 2” from the device list. Note: For detailed instructions
to pair Mac or Windows PC, please refer to online support.
Note: In DSS operation the left audio channel will play through
the Sound Platform 2 with on the display and the right
audio channel will play through the Sound Platform 2 with
on the display. The two systems must be within Bluetooth range
of 33ft line of site of each other.
Note: DSS operation is only compatible with Bluetooth
streaming and cannot be used with Aux In or Radio mode.
Note: If the source on either Sound Platform 2 is changed from
Bluetooth, the DSS mode will be disconnected and the systems
will function independently. When both systems are set to
Bluetooth source again they will automatically connect to each
other for DSS playback.
Note: In DSS operation the volume is synced between both
Sound Platform devices. When DSS playback is enabled both
systems will be set to a starting volume of 10 and can be
adjusted from either system to the desired playback volume.
* Disconnecting DSS & Resetting Bluetooth: To disconnect
the DSS pairing between two Sound Platform 2 systems, hold
down the button for 12 seconds. The
icons on the LCD will flash slowly for 10 times and then flash
quickly for 5 times indicating that DSS pairing has been
disconnected. Use this same procedure to reset your DSS and
Bluetooth settings. Before pairing two Sound Platform 2
systems togehter, please reset your Bluetooth settings and
follow the directions provided to pair.
Sound Platform 2
For further assistance with setting up Sound Platform 2,
we are available at:
support@soundfreaq.com
soundfreaq.com/support
DSS (Dual System Streaming) allows two Sound Platform 2
systems to be paired together to play as one speaker system with
left and right audio split between each for true stereo separation.
Button
/
™
/
™
/
™
Comments to this Manuals